My HTPC that was connected to my cablecard tuner started acting up.
This was an AMD Athlon 2 Dual Core system. I have the system on a UPS
and am able to monitor it's power usage through the UPS. The AMD system
was pulling about 120 watts on average. The system started acting up
(it turned out to have a memory problem) so I pulled it and replaced it
with another system I had running an Intel Celeron G530 processor.
The
G530 is the baby brother to the i3 family of processors. The G530 is
rated at 65 watts TDP, I was surprised to see my UPS indicate about 10
watts of power while idling. This is with windows up, Media Center
running but no shows recording or being watched.
With this low of power
usage I'm going to dump the MCE Standby Tool and stop putting the PC
to sleep in between shows. I think keeping the computer up all the time
will make it more reliable and user friendly.
Tuesday, June 12, 2012
Oh No My Hauppauge 2650 cablecard tuner has died
Embarrassed Update: It turns out it was not the Hauppauge 2650 that
died but rather the power wart I was powering it with. The replacement
2650 arrived and had the same issues as mine. I replaced the power wart
and my old 2650 is running great.
There is a story behind the power wart I was using, my original Hauppauge power wart died and they shipped me a replacement. While waiting for the replacement I found one in my parts bin that matched the output so I put it to work. Weird to lose two power warts in such a short time frame. I now have the HTPC on a UPS so if it was power issues causing the failures I should be OK now.
My Hauppauge 2650 tuner started acting flakey, going offline and refusing to tune channels, usually rebooting the computer would fix the issue so I'm not positive the problem was Hauppauge's. Now the Hauppauge has died completely, all that I get is a quickly flashing tuner 2 light, all others are out.
Hauppauge's warranty is 2 years and they've been good enough to pre ship my replacement, unfortunately it shipped by slow boat and won't arrive for a week.
Thankfully my wife hasn't returned her cable DVR yet so she is not out of business for this time. All of the issues that I've been facing are not instilling confidence in her for this switch over to a PC DVR. Hopefully all will work well soon.
There is a story behind the power wart I was using, my original Hauppauge power wart died and they shipped me a replacement. While waiting for the replacement I found one in my parts bin that matched the output so I put it to work. Weird to lose two power warts in such a short time frame. I now have the HTPC on a UPS so if it was power issues causing the failures I should be OK now.
My Hauppauge 2650 tuner started acting flakey, going offline and refusing to tune channels, usually rebooting the computer would fix the issue so I'm not positive the problem was Hauppauge's. Now the Hauppauge has died completely, all that I get is a quickly flashing tuner 2 light, all others are out.
Hauppauge's warranty is 2 years and they've been good enough to pre ship my replacement, unfortunately it shipped by slow boat and won't arrive for a week.
Thankfully my wife hasn't returned her cable DVR yet so she is not out of business for this time. All of the issues that I've been facing are not instilling confidence in her for this switch over to a PC DVR. Hopefully all will work well soon.
Wednesday, May 23, 2012
UPDATE: Replacing My Wife's DVR with an HTPC
My replacement DVR is still not working fully to my satisfaction. 95% of the time it works flawlessly but then every once in a while I get errors like "tuner not found" or "no tuner available" or this morning Media Center came up and said "CableCard device found, would you like to install it?". A reboot generally fixes these issues.
I'm running a program on the PC called MCE Standby Tool, this program looks at the recording schedule and wakes the PC up to record shows and then puts it back to sleep when nothing is happening. If a user starts using the machine, i.e. watching a program or using the remote it delays for a set period of time before putting the machine to sleep.
If I could work out these issues I'd be able to complete the conversion and get rid of the cable company DVR.
After moving several computers around throughout the house to find the perfect setup here is what I am currently running:
HTPC in family room (this is my main recording PC)
processor is Athlon II X2 260
memory is 4GB DDR2
hard drive is 1TB
Tuner is Hauppauge 2650 CableCard Dual Tuner
HTPC in front room (this one is on dual band wireless and is used only to view videos)
Foxconn Small Form Factor Computer with
processor AMD E-350 APU
memory is 4GB DDR3
hard drive is 10k RPM 74GB Western Digital
HTPC in bed room (this one is mostly for watching videos but can also record)
processor is Intel G530 (incredible processor for the money)
memory is 4GB DDR2
hard drive is 10K RPM 74GB Western Digital
Tuner is SiliconDust HDHomeRun dual tuner
Home Server
Windows Home Server 1.0
processor is older AMD X64 single core processor
memory is 2GB DDR
hard drives are 2 X 1TB and 1 X 1.5TB and 1 X 500GB
My next task is going to be upgrading my Windows Home Server to a new processor platform to cut down on it's energy usage. I've just ordered an Intel G630T processor and an H61 mobo for this project. Updates when I get them installed.
I'm running a program on the PC called MCE Standby Tool, this program looks at the recording schedule and wakes the PC up to record shows and then puts it back to sleep when nothing is happening. If a user starts using the machine, i.e. watching a program or using the remote it delays for a set period of time before putting the machine to sleep.
If I could work out these issues I'd be able to complete the conversion and get rid of the cable company DVR.
After moving several computers around throughout the house to find the perfect setup here is what I am currently running:
HTPC in family room (this is my main recording PC)
processor is Athlon II X2 260
memory is 4GB DDR2
hard drive is 1TB
Tuner is Hauppauge 2650 CableCard Dual Tuner
HTPC in front room (this one is on dual band wireless and is used only to view videos)
Foxconn Small Form Factor Computer with
processor AMD E-350 APU
memory is 4GB DDR3
hard drive is 10k RPM 74GB Western Digital
HTPC in bed room (this one is mostly for watching videos but can also record)
processor is Intel G530 (incredible processor for the money)
memory is 4GB DDR2
hard drive is 10K RPM 74GB Western Digital
Tuner is SiliconDust HDHomeRun dual tuner
Home Server
Windows Home Server 1.0
processor is older AMD X64 single core processor
memory is 2GB DDR
hard drives are 2 X 1TB and 1 X 1.5TB and 1 X 500GB
My next task is going to be upgrading my Windows Home Server to a new processor platform to cut down on it's energy usage. I've just ordered an Intel G630T processor and an H61 mobo for this project. Updates when I get them installed.
Thursday, March 22, 2012
Replacing My Wife's DVR with an HTPC
I think I'm almost ready to ask my wife to switch from her cable company dvr to my Win 7 Media Center PC with a Hauppauge Cablecard 2650 tuner.
If you look at my earlier posts you will see that I bought a low power HTPC system for this use but found it just wasn't powerful enough. I'm trying to build a system that doesn't delay, pause or skip as I want my wife to be happy with it.
After replacing the low power system with a dual core Athlon II system I found that my wireless N network was also too slow so I purchased a Netgear powerline adapter kit.
My system is now operating smoothly, no hiccups on the network and no hiccups caused by CPU performance issues.
Through this entire process the Hauppauge 2650 has been flawless.
One issue that I am still facing is that if I turn off the tv or change the source on the tv to something other than the computer while I have Media Center open I will find a black screen when I return to the computer source. The answers I’ve found so far are 1) try to remember to shut down Media Center prior to turning off the tv or changing source and 2) if you get the black screen you can unplug and replug the hdmi cable or you can logoff or shutdown the computer and restart or log back in. Anyone have any better ideas to fix this problem?
If you look at my earlier posts you will see that I bought a low power HTPC system for this use but found it just wasn't powerful enough. I'm trying to build a system that doesn't delay, pause or skip as I want my wife to be happy with it.
After replacing the low power system with a dual core Athlon II system I found that my wireless N network was also too slow so I purchased a Netgear powerline adapter kit.
My system is now operating smoothly, no hiccups on the network and no hiccups caused by CPU performance issues.
Through this entire process the Hauppauge 2650 has been flawless.
One issue that I am still facing is that if I turn off the tv or change the source on the tv to something other than the computer while I have Media Center open I will find a black screen when I return to the computer source. The answers I’ve found so far are 1) try to remember to shut down Media Center prior to turning off the tv or changing source and 2) if you get the black screen you can unplug and replug the hdmi cable or you can logoff or shutdown the computer and restart or log back in. Anyone have any better ideas to fix this problem?
Wednesday, March 21, 2012
Powerline Adapter is working great
The Netgear XAVB5004 powerline adapter set that I installed last night is working quite well. I copied a file to see how well it would work and saw speeds between 5.5 and 6MBs. This is about 48Mbs, not anywhere near the 500Mbs the unit is rated at but plenty for streaming video.
I streamed several different videos, one a 1080p BluRay and the videos streamed flawlessly.
So far I am very pleased with this purchase.
that I installed last night is working quite well. I copied a file to see how well it would work and saw speeds between 5.5 and 6MBs. This is about 48Mbs, not anywhere near the 500Mbs the unit is rated at but plenty for streaming video.I streamed several different videos, one a 1080p BluRay and the videos streamed flawlessly.
So far I am very pleased with this purchase.
Tuesday, March 20, 2012
Foxconn SFF not working out like I hoped
I'm having a couple of issues with this darling little computer, with one of my televisions I get video blinking. The screen blinks on and off every few seconds. Hard to work with it when it's doing that. With another television the screen is rock solid. I haven't figured out what is causing this issue yet, just reloaded the box from scratch and am going to have another go at it tonight.
The other issue I have is that the E-350 AMD APU processor doesn't seem to have enough power to run my Hauppauge 2650 CableCard and do all that I want. It gets slow and sometimes doesn't respond to remote input for quite a while. Part of this issue may be caused by my wireless network and the computer looking to my home server for some files over the wireless.
I replaced the SFF (Small Form Factor) computer with an AMD dual core Phenom II system. It's working out so far but does still snag on the wireless from time to time.
I've ordered a Netgear powerline 500Mbs system (XAVB5004 ~$130 + tax for the kit) to replace the wireless to this location. I received it today and will install it tonight. If it really helps speed stuff up I may try the SFF in that location again as that is my preferred machine for an always on DVR solution.
More updates soon.
The other issue I have is that the E-350 AMD APU processor doesn't seem to have enough power to run my Hauppauge 2650 CableCard and do all that I want. It gets slow and sometimes doesn't respond to remote input for quite a while. Part of this issue may be caused by my wireless network and the computer looking to my home server for some files over the wireless.
I replaced the SFF (Small Form Factor) computer with an AMD dual core Phenom II system. It's working out so far but does still snag on the wireless from time to time.
I've ordered a Netgear powerline 500Mbs system (XAVB5004 ~$130 + tax for the kit)
to replace the wireless to this location. I received it today and will install it tonight. If it really helps speed stuff up I may try the SFF in that location again as that is my preferred machine for an always on DVR solution.More updates soon.
Thursday, March 1, 2012
Newegg has my new, $109 computer, on sale for 15% right now
Hurry and get one, I am loving it so far. Review to come soon.
Discount code is EMCNGNJ29, not sure how long it will be good for. This should make the cost about $93 + tax if you are in California. It still has free shipping.
SOLD OUT
Discount code is EMCNGNJ29, not sure how long it will be good for. This should make the cost about $93 + tax if you are in California. It still has free shipping.
SOLD OUT
Subscribe to:
Posts (Atom)